Corrugated Panel roll forming machine
This Roof Panel/Wall Panel Roll Forming Machine can produce any kinds of thickness of corrugated sheets, trapezoidal sheets. Normal thickness is from 0.3-0.8mm. The Corrugated Steel Silo Roll Forming Machine can work with Max. thickness 4.0-5.0mm, its product is used as corrugated steel silo. In South Africa, the Trapezoidal Panel Roll Forming Machine also is known as IBR Roll Forming Machine.
There are different kinds of machine structures, such as Torri stands, Thick wall stands and cast iron stands.
Normal speed is 10-15m/min. Max. Working speed can reach at 25m/min.
|Roof panel/Wall panel roll forming machine|
|1||Suitable material||Type:Galvanized Coil, PPGI, Carbon steel Coil|
|Yield strength: 250 – 550MPa|
|Tensil stress( Mpa):G350Mpa-G550Mpa|
|2||Nominal forming speed(m/min)||10-30||Or according to your requirement|
|3||Forming station||18||According to your profile|
|4||Decoiler||Manual decoiler||Hydraulic decoiler or double head decoiler|
|5||Main machine motor||Sino-German Brand||Siemens|
|8||Driving system||Chain drive||Gearbox drive|
|9||Rollers’ materail||Steel #45||GCr15|
|10||Station structure||Wall panel station||Forged Iron stationOr torri stand structure|
|11||Punching system||No||Hydraulic punching station or Punching press|
|13||Power supply requirement||380V 60Hz||Or according to your requirement|
|14||Machine color||Industrial blue||Or according to your requirement|
4. Roll forming stands
5. Driving system
6. Cutting system