Inkcazo
IStud kunye Track Roll Ukwenza Machine, njengoko kwaziwa ngokubaUmatshini wokwenza umnqwazi, umatshini wokwenza umatshini wokwenza umnqwazi, umatshini wokwenza umatshini wokwenza umnqwazi weOmeganjalo-njalo inokuvelisa izikhonkwane, iingoma kunye nezinye iimilo ezininzi ezithatyathwe kuhlobo lweShape C.
Ubunzima buqhelekile bunokubunjwa kwi-0.25-1.2mm.
Ukuba ufuna ukusebenza kakuhle ngakumbi ke sicebisa ukuba wenze i-adpot i-Flying shear nge-No-stop system.
UMax. Isantya somgca wonke sinokufikelela kwi-40m / min.
Ukuba ufuna ukuvelisa ngaphezulu kweprofayile enye kumatshini omnye, sincoma umatshini wokwenza imiqolo emibini kunye nemiqolo emithathu yokwenza umatshini ukugcina indawo kunye noqoqosho.
IiNgcaciso zobuGcisa
| I-Stud, iTrack kunye ne-Channel Roll Forming Machine | |||
| Hayi. | Into | Inkcazo | Ukhetho |
| 1 | Izinto ezifanelekileyo | Uhlobo: Ikhoyili yeGalvanized, PPGI, iCoil yentsimbi yeCarbon | |
| Ukutyeba(mm):0.25-1.2 | |||
| Amandla esivuno: 250 - 550MPa | |||
| Uxinzelelo lwe-Tensil ( Mpa): G350Mpa-G550Mpa | |||
| 2 | Isantya sokwenza igama (m/min) | 10-40 | Okanye ngokwemfuno yakho |
| 3 | Ukwenza isitishi | 8-14 | |
| 4 | I-Decoiler | I-decoiler eyenziwe ngesandla | I-Hydraulic decoiler okanye i-decoiler yentloko ephindwe kabini |
| 5 | Injini yomatshini ophambili | Igama leSino-German | Siemens |
| 6 | Uphawu lwePLC | Panasonic | Siemens |
| 7 | Inverter uphawu | Yaskawa | |
| 8 | Inkqubo yokuqhuba | Chain drive | Gearbox drive |
| 9 | Iirola'impahla | Intsimbi #45 | GCr15 |
| 10 | Ulwakhiwo lwesitishi | Isikhululo sodonga sodonga | Forged Iron stationOr torri stand structure |
| 11 | Inkqubo yokubetha | No | Isikhululo sokungqiya nge-hydraulic okanye iPunching press |
| 12 | Inkqubo yokusika | Emva kokusika | Ukusika kwangaphambili |
| 13 | Imfuno yonikezelo lwamandla | 380V 60Hz | Okanye ngokwemfuno yakho |
| 14 | Umbala womatshini | Ishishini eliluhlaza | Okanye ngokwemfuno yakho |
Itshathi yokuHamba
1. I-Decoiler
2. Ukutya
3.Ukubetha
4. Izitendi ezenza umqulu
5. Inkqubo yokuqhuba
6. Inkqubo yokusika
Abanye
Ngaphandle kwetafile
