Bayani
Karfe Strut&Rail Roll Fomring Machinehada daInjin Ƙofar Rail Roll,Karfe C Channel Roll Forming Machine,Solar Rack Roll Forming Machineda dai sauransu The aiki kauri iya zama 1.5-2.5mm. Max. gudun aiki zai iya zama 25m/min. Muna ɗaukar tsarin tuki na gearbox don ci gaba da aikin injin mu tare da babban sauri da tsawaita rayuwar sabis.
Ƙididdiga na Fasaha
| Karfe Strut& Rail Roll kafa inji | |||
| A'a. | Abu | Ƙayyadaddun bayanai | Na zaɓi |
| 1 | Abubuwan da suka dace | Nau'in: Galvanized Coil, PPGI, Carbon Karfe Coil | |
| Kauri (mm): 1.5-2.5 | |||
| Ƙarfin haɓaka: 250 - 550MPa | |||
| Danniya Tensil( Mpa): G350Mpa-G550Mpa | |||
| 2 | Gudun ƙira na ƙira (m/min) | 10-20 | Ko bisa ga buƙatun ku |
| 3 | Kafa tashar | 17 | Bisa ga bayanin ku |
| 4 | Kayan ado | Decoiler na hannu | Na'ura mai aiki da karfin ruwa decoiler ko biyu kai decoiler |
| 5 | Babban injin injin | Alamar Sino-Jamus | Siemens |
| 6 | PLC alama | Panasonic | Siemens |
| 7 | Alamar inverter | Yaskawa | |
| 8 | Tsarin tuki | Gearbox drive | Tukar sarka |
| 9 | Rollers'kayan abu | Karfe #45 | GCr15 |
| 10 | Tsarin tashar | Tsarin tsaye na Torri | Ƙirƙirar tashar ƙarfe ko Tsarin bangon bango |
| 11 | Tsarin naushi | No | Tashar buga naushi na hydraulic ko Punching press |
| 12 | Tsarin yanke | Bayan yankewa | Pre-yanke |
| 13 | Bukatar samar da wutar lantarki | 380V 60Hz | Ko bisa ga buƙatun ku |
| 14 | Launin inji | Launin masana'antu | Ko bisa ga buƙatun ku |
Jadawalin Yawo
1. Decoiler
2. Ciyarwa
3.Bugi
4. Mirgine kafa tsaye
5. Tsarin tuki
6. Tsarin yankan
Wasu
Waje tebur
Aiko mana da sakon ku:
Ku rubuta sakonku anan ku aiko mana
