Deep Embossing TR80 Metal Deck Roll Forming Machine

Guiding bars maintain alignment between the steel coil and the machine, ensuring the profile's straightness. Throughout the entire forming line, multiple guiding rollers are strategically placed for enhanced precision.

Typically, embossing is around 2 mm deep, but in this solution we've increased it to 4 mm for clearer and more pronounced patterns.

Slitting Device & Wastage collector

Before the steel coil enters the forming rollers, it encounters the slitting devices on the left side. As the width of coils purchased from the steel mill generally are close to but not the actual feeding width of this profile, this device assists in cutting and collecting excess width, saving expenses on coil slitting at the steel mill.

Roll Forming Machine

This roll forming machine employs a wall panel structure and chain-driving system. Due to the steel coil's strength reaching 350MPA, the forming speed is slightly reduced to deal with harder forming work. The coil passes through a total of 33 sets of roll forming stations, ultimately producing a metal deck profile on customer drawings.

Hydraulic Cutting Machine & PLC

This cutting machine generates approximately 8mm of waste per cut, but with minimal burrs on the cut edges. Operators can control production speed, set dimensions, cutting lengths, and more through the PLC screen. The encoder along the production line converts sensed steel coil lengths into electrical signals, allowing the cutting machine to control cutting errors within 1mm, ensuring high-quality products and minimizing waste from incorrect cuts.